Натиснете за Галерия!
IStick Pico Mega, подобрена версия на iStick Pico,съвместима е както с 26650, така и с 18650 батерии. Разполага с по-прост интерфейс за VW режим, интелигентен режим за лесна работа и персонализирано лого за забавление.
(В цената не е включена батерия и изпарител).
Parameter:
For iStick Pico Mega:
Size: 53.5mm*31.5mm*73.5mm
Thread type: 510 thread
Cell type: High-rate 18650 cell (Continuous discharge current should be above 25A)
Cell type High-rate 26650 cell (Continuous discharge current should be above 35A)
Output mode: Smart/VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Output wattage: 1-80W
Resistance range: 0.05-1.5ohm (TC modes)
Resistance range: 0.1-3.5ohm (Smart/VW/Bypass mode)
Temperature range: 100-315℃/200-600℉ (TC modes)
Color: Hot pink, black, grey, silver, white
For iStick Pico Mega:
Size: 53.5mm*31.5mm*73.5mm
Thread type: 510 thread
Cell type: High-rate 18650 cell (Continuous discharge current should be above 25A)
Cell type High-rate 26650 cell (Continuous discharge current should be above 35A)
Output mode: Smart/VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Output wattage: 1-80W
Resistance range: 0.05-1.5ohm (TC modes)
Resistance range: 0.1-3.5ohm (Smart/VW/Bypass mode)
Temperature range: 100-315℃/200-600℉ (TC modes)
Color: Hot pink, black, grey, silver, white
Features:
1. New Firmware V1.01: The new firmware features a simpler interface for VW mode, a Smart mode for easy operation and a custom logo for fun.
2. Interchangeable 18650 or 26650 Cell: The iStick Pico Mega can be powered by a 26650 cell or a 18650 cell when inserted with the battery sleeve.
3. Powerful Output and Various Modes Available: It allows an intelligent and satisfying draw with 80W maximum output and switchable Smart/VW/Bypass/TC(Ni,Ti,SS,TCR) modes.
4. Unique Bottom Design: The ventilation holes at the bottom are for better heat dissipation and the adjustment buttons are located at the bottom as well.
5. 510 Spring Connector: It also retains stainless steel spring loaded 510 connector for strong wear resistance and high adaptability.
Micro USB Port
Charging: The recommended way is to charge the 18650 or 26650 cell externally. The cell can also be charged in the iStick Pico Mega through the side USB port via 1A wall adapter or computer.
Charging: The recommended way is to charge the 18650 or 26650 cell externally. The cell can also be charged in the iStick Pico Mega through the side USB port via 1A wall adapter or computer.
Firmware upgrading: The firmware can be upgraded by
connecting the device with a computer through the USB port via a micro
USB cable.